LTXG-8 liquid filling and capping machine

Brief Introduction:

LTXG-8 type eight-head filling and double-head plugging and capping machine is suitable for automatic filling of liquids in the pharmaceutical, food, chemical, pesticide and other industries. It adopts double-track linear filling and double-head plugging and capping, which is suitable for bottles of different materials and specifications. The machine is compact and reasonable in structure, and can be easily linked with other equipment to form a line. The metering pump is made of 316L stainless steel, which is easy to clean and assemble. This machine is equipped with a protective cover composed of 304# stainless steel frame and PV transparent plate.

Main Technical Data:

Main part name:

1. Conveyor belt  
2. Filling head and bottle wheel      
3. Metering pump structure     
4. Main turntable and bottle control cylinder
5. Cap feeding and hanging cap structure
6. Capping structure
7. Electrical operation interface

Filling head and bottle control cylinder

Filling pump set

Main turntable and bottle control cylinder

1. Counting photoelectric sensor
2. Bottle stop ring
3. Main turntable
4. Adjusting pressure plate
5. Move the bottle stop plate
6. Air pipe adjusting screw
7. Move the cylinder to stop the bottle

Capping head mechanism

When the bottle with the bottle cap pressed is moved by the main turntable and enters under the capping head, the capping head lifting shaft (3) is driven by the cam under the frame to move downward, and at the same time, the air intake of the cap is blown down, so that the spring compresses the magnet Overload protector, the capping head is displaced upward, and the rotating three-bar cap screwing manipulator shrinks toward the center, grabs the cover and tightens it. The rotation of the manipulator is driven by the motor (6) to rotate. If you need to adjust the torque of the capping, you can loosen it. Open a locking screw on the magnet overload protector, rotate the protector's threaded jacket to change the distance between the inner magnetic rings, turn up to increase the capping torque, turn down to reduce the capping torque, adjust the pressure and then tighten the lock The screw magnetic overload protector will idling when it exceeds the torque to protect the cover from being worn. The lifting shaft adjustment handwheel is used to adjust the height of the entire capping mechanism, and the lift counter is to display the size of the capping head being adjusted up and down.

1. Vacuum tube
2. Plug feeding vibration plate
3. Manipulator lifting shaft
4. Down plug track
5. Vacuum plug nozzle
6. Inner plug moving cylinder
7. Inner plug positioning plate
8. Secondary plugging head (two groups)
9. Photoelectric sensor
10. Lifting shaft adjustment hand wheel
11. Upper cover rotation servo motor
12. Cap feeding vibration plate
13. Pressing plug and capping manipulator
14. Lower cover track
15. Vacuum cap nozzle
16. Outer cover moving cylinder
17. Outer cover positioning plate